5 Frames with Rollei Superpan 200 and a Minolta 460Tx 110

By Tony Warren

I really enjoy using 16mm film and I now have three cameras taking this stock, one 16mm and two 110 of Minolta and Pentax manufacture. My favourite film so far is Rollei’s Superpan 200 which I buy in 120 and strip down to three 16mm lengths. I use Rodinal developer exclusively with a 1:50 dilution which I have found gives me my preferred density, grain and contrast range.

It is a very thin and clear based emulsion which seems to give rise to black haloes around some clear sections of negatives. I digitise files on a copying rig I made and my Sony A3000 and 55mm Micro Nikkor on an adapter and extension tubes which may be the source of the halation. This would possibly not be as pronounced using a scanner.

As I have found with most of the emulsions I have used in 16mm, grain is most noticeable in plain, mid-tone areas with little detail, otherwise it is not very intrusive, as with this emulsion. A fine grain developer might improve things but I quite like the punch that the grain and acuity Rodinal produces gives to an image. Comparing results from this film between 16mm and medium format shows a completely different character to the results along with variations caused by the respective focal lengths used.

Geraldine Double Fairlie.
NZ railways Double Fairlie locomotive Geraldine.

The first frame is taken in Dunedin’s Toitu Early Settlers museum and features “Geraldine”, an unusual double Fairlie steam locomotive once used on New Zealand railways and now preserved as a display. This engine is essentially two locomotives facing opposite ways, the original “push-me-pull-me” perhaps, with a common footplate between them.

Entrance to Toitu Early Settlers Museum, Dunedin, NZ
Entrance to Toitu Early Settlers Museum, Dunedin, NZEntrance to Toitu Early Settlers Museum, Dunedin, NZ

The second frame is of the museum’s entrance in the modern extension.

Overpass, Central Dunedin NZ
Overpass, Central Dunedin NZ

This overpass is part of Dunedin’s central area road network.

Re-modelled sea wall, Dunedin waterfront with jogger.
Re-modelled sea wall, Dunedin waterfront with jogger.

A section of the harbour wall that has been remodelled and used for fishing, walkers and, as here, joggers. The slight halation effect mentioned is visible around the lamp standards.

Dunedin wharf fishing pontoon.
Dunedin wharf fishing pontoon.

Finally, fishing as a spectator sport? The halation I noted above is vey evident around the heavily shadowed structure of the jetty which is completely clear in the negative.

I have used this film in sub-miniature, 35mm and medium formats and it produces good results in all of them. The differences come from the size of the negatives and the effect that has on detail. So a versatile film that offers various possibilities for interpretation of a subject.

Share this post:

Find more similar content on 35mmc

Use the tags below to search for more posts on related topics:

Contribute to 35mmc for an ad-free experience.

There are two ways to contribute to 35mmc and experience it without the adverts:

Paid Subscription – £2.99 per month and you’ll never see an advert again! (Free 3-day trial).

Subscribe here.

Content contributor – become a part of the world’s biggest film and alternative photography community blog. All our Contributors have an ad-free experience for life.

Sign up here.

About The Author

By Tony Warren
In my 60 or so years of serious involvement in photography I have seen the demise of the viewfinder, the rise of the SLR and the eclipse of them all with the meteoric development of the digital camera. Through it all, however, and above all else, the image is what it is all about so I now use film alongside digital. Whatever is the most appropriate or practical. My contributions will hopefully be useful for anyone interested in using film and also how a died-in-the-wool antique like me is continuing his life-long addiction in the digital age, using both platforms. The major benefit of an extended retirement is that I can spend most of my time nowadays with photography and writing about it.
View Profile

Comments

Gary Smith on 5 Frames with Rollei Superpan 200 and a Minolta 460Tx 110

Comment posted: 04/07/2024

Great shots Tony! At this stage in my life, I don't see myself ever shooting 110 again (for that matter, I'm not sure that I ever did back in the day either). Once I do my 16 rolls with Df96 monobath, maybe I'll try Rodinal. I like the gradation on your posted examples.
Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Tony Warren replied:

Comment posted: 04/07/2024

Thanks Gary. The film and Rodinal are really playing nice here I must say and this Superpan may become my only film just as Rodinal has for a deeleoper. It is so flexible and just goes on forever. No decanting ID11 into small bottles and keeping track of dates. Is your Df96 time limited?

Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

John Furlong on 5 Frames with Rollei Superpan 200 and a Minolta 460Tx 110

Comment posted: 04/07/2024

Great images - I think the device hiding behind the camera merits a posting all to itself...
;0)
Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Gary Smith replied:

Comment posted: 04/07/2024

I'm guessing it's Tony's slitter?

Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Tony Warren replied:

Comment posted: 04/07/2024

Thank you John. As Gary says, the device is my film slitter. I wrote about it a while back A Win/Lose Tale of Making a 120 to 16mm film slitter. if you want to have a look. I have further modified it since to four blades, like my very first effort. Three blades picks up the edge printing on 120 on one strip.

Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Tony Warren replied:

Comment posted: 04/07/2024

Good guess, Gary.

Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

dakokom866 on 5 Frames with Rollei Superpan 200 and a Minolta 460Tx 110

Comment posted: 04/07/2024

yes
Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Lance Rowley on 5 Frames with Rollei Superpan 200 and a Minolta 460Tx 110

Comment posted: 06/07/2024

Really phenomenal photos! I have a Minolta 460tx and have only used it once so far with a roll Tiger 200. Got some pretty good results from it too! I hear that Orca is great, but I’m really impressed with the film you cut down and showcased in this post. I loved reading your prior articles about the film slitter (or splitter?) and your adventures with reloading 110 cartridges. I’d love to give it a try but it feels a little outside of my level. Maybe someday though! Thanks for always sharing such great information Tony!
Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Tony Warren replied:

Comment posted: 06/07/2024

Thank you Lance. The 460 Tx is a great camera. Tiger and Orca are both good films but Orca does have more visible grain than some of the films I have been experimenting with. How much it shows depends very much on the subject matter. There are ready made slitters (splitters I believe refer to only one cut but probably a bit academic) available and the matchbox and two scalpel blade version lets you produce a single 16mm strip from 35mm film. You would get two 110 lengths from a 36exp film. Or you could use it with bulk 35mm. It would be more manageable than my version which needs care to avoid a terrible tangle to sort out in the dark. Anyway, I am very pleased to hear you enjoy my ramblings. All the best.

Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Leave a Comment

Leave a Reply

Your email address will not be published. Required fields are marked *